一部の界隈では有名だった?のかもですが最近入手して自宅のコアスイッチにしようとしている物があります。

この製品ちっぽけなチープな筐体でありながら、L3マネージドスイッチなんです。
昔から帯域などをグラフで眺めるのが好きだったのでsnmpが使える機器を使用していたのですが、10Gに切り替える際にCisco841とお別れし、2.5G/10Gスイッチへの移行によってCatalyst2960ともお別れをしてしまったため色々と物色しているときに巡り合いました。
私は上記のものを購入したのですが、他を眺めていると同じレイアウトのものを複数見つけることができます。

他にもありそうですが、おそらく同じものでOEM品だと思われます。そのOEM供給元がおそらくUNIPOEというメーカーが出している PM208TSM V1 ではないかと推測しています。
いずれも$100前後と10Gbe L3 Managed スイッチとしては破格の安さです。

基本的な設定はWebUIから実施しますが、どうやらすべての機能がWebUIから実施できるわけでは無いようで、シリアルコンソールかssh等でアクセスしてCLIから設定することで全ての機能を使えるようになるようです。
コマンドはCiscoのIOSっぽい感じ

Switch#?
Exec commands:
baudrate Baudrate
cd Displays the name of or changes the current directory
clear Reset functions
clock Set clock
config Enter configuration mode
copy Copy file
crypto Ssh crypto key clear command
debug Debugging functions
delete Deletes one files
dir Displays a list of files and subdirectories in a directory
disable Turn off privileged mode command
enable Turn on privileged mode command
exit End current mode and down to previous mode
format Formats a device
ftp-dir Show remote server file information
help Description of the interactive help system
logging Logging
no Disable debugging functions (see also ‘debug’)
ping Send ipv4 echo messages
ping6 Send ipv6 echo messages
public-key public key
pwd Displays the name of the current directory
reload Reboot switch
rename Renames a file
set Set
setup Run the SETUP command facility
show Show running system information
telnet Connect remote computer
terminal Set terminal line parameters
traceroute Trace route to destination
traceroute6 Trace route to IPv6 destination
who Display who is on vty
write Write running configuration to memory or terminal

Switch#conf term
Switch(config)#?
Configure commands:
show Show running system information
aaa Configure AAA(Authentication, Authorization and pre-Accounting)
aaa-accounting Configure accounting
access-list Add an access list entry
accounting Accounting configuration commands
am Configure AM
anti-arpscan Anti-arpscan
arp Arp
authentication Authentication configuration commands
authorization Authorization configuration commands
backup Backup running-config
banner Define a login banner
bgp BGP information
bpdu-tunnel-protocol Bpdu-tunnel
button-reset Reset button
class-map Configure QoS Class Map
clock Set clock
cpu-rx-ratelimit CPU received traffic rate limit
delete delete
dns DNS
dns-server Set a Nameserver to the DNS
dosattack-check Dosattack
dot1x Configure 802.1X
dynamic-vlan Configure dynamic vlan
enable Modify enable password parameters
end End current mode and change to EXEC mode
erps-ring Ethernet ring running G.8032
errp errp
ethernet Ethernet
exec-timeout Set timeout value
exit End current mode and down to previous mode
fib FIB information
firewall Configure firewall status
flowctrl-special set flowctrl
ftp-server FTP Server config
fulleaps FULL Ethernet Automatic Protection Switching
garp Set GARP parameter
gvrp Set GVRP parameter
hardware-address-list Permit DHCP adding option 66 or 150 or 14x to the client in the hardware-address-list
help Description of the interactive help system
history Set history related parameters
hostname Modify hostname
interface Select an interface to configure
ip IP information
ipv6 IPv6 information
isolate-port Isolate-port information
key Authentication key management
l2-address-table L2 address table setting
l3-station-move Configure l3-station-move
lacp Lacp configuration
lldp Link Layer Discovery Protocol
load load
load-balance Load balancing method
local-arp local arp
logging Logging
login Enable password checking
loopback-detection Loopback-detection
mac-access-list Global MAC configuration subcommands_Named access-list
mac-address Mac address config
mac-address-learning Mac address-learning config
mac-address-table MAC address table setting
mac-authentication-bypass Configure MAC authentication bypass feature
mac-ip-access-list Global MAC-IP configuration subcommands_Named access-list
mac-vlan Configure mac vlan
mls Configure MultiLayer Switching characteristics
monitor Configure SPAN monitoring
mrpp Multi-layer Ring Protection Protocol
mtu Maximum Transmission Unit
multi Multi users
multi-recursive-routes Multiple recursive routes
multicast Multicast config
multicast-vlan Configure multicast vlan
neighboure neighboure system
no Negate a command or set its defaults
ntp Network time protocol
onvif Onvif protocol
ospf Open Shortest Path First (OSPF)
password Assign the terminal connection password
policy Policy
policy-map Configure QoS Policy Map
port-group Port-group configuration
port-led port led
port-rate-statistics port-rate-statistics
port-redirect Port-redirect
port-scan-mode Port-scan-mode
pppoe PPPOE intermediate Agent
privilege Set user privilege level
profile-id Add an profile list entry
protocol-vlan Configure protocol vlan
radius Configure RADIUS
radius-server Configure RADIUS
rip Routing Information Protocol (RIP)
rmon Config rmon
router Enable a routing process
router-id Router identifier for this system
rps-power rps-power
savi Source Address Validation Improvements
service Modify use of network based services
service-policy Configure QoS Service Policy
set Set
sflow Sflow Global Configuration
show Show running system information
snmp-server snmp
sntp Simple Network Time protocol
spanning-tree Spanning-tree config
ssh-server Ssh service config command
storm-control Storm-control
subnet-vlan Configure Subnet vlan
sysContact sysContact
sysLocation SysLocation
tacacs-server Config tacacs+ server
telnet-server Telnet server
tftp-server TFTP Server config
time-range Configure a time range
transceiver-monitoring Transceiver monitoring
uldp ULDP information
ulpp Uplink Protection Protocol
ulsm Uplink State Monitor
userdefined-access-list Specify userdefined access list
username Establish User Name Authentication
userpassword Specifies the password for the user
vacl Configure Vlan Acl
vlan Vlan Commands
vlan-port-redirect vlan-port-redirect
vlan-trunk-range vlan-trunk-range
voice-vlan Configure voice vlan
web Config web
web-auth Web set authentication privilege

snmpでmibを眺めると
iso.3.6.1.2.1.1.1.0 = STRING: “PM208TSM-V1”
こんな文字列を見つけたのでOEM元を捜索できました。

投稿者 chobi

コメントを残す

メールアドレスが公開されることはありません。 が付いている欄は必須項目です